Teflon® PFA 940HP Plus
全氟烷氧基
The Chemours Company
產品說明:
For inventory control purposes product name may be followed by an X.
Products labeled PFA 940HP Plus and PFA 940HP Plus X are equivalent and all information in this document is applicable to both.
Typical Application
With a typical MIT folding endurance of 300,000* cycles, Teflon ™ PFA 940HP Plus is designed to withstand repeated flexing and aggressive chemical stress-cracking agents. Applications for Teflon ™ PFA 940HP Plus include fluid handling components for high-performance chemical delivery systems, as well as tubing, unsupported pipe linings for the production of ultra-pure chemicals, and semiconductor components where purity in the parts-per-billion range is critical.
Description
Teflon ™ PFA 940HP Plus is a premium fluoropolymer resin available in pellet form. Teflon ™ PFA 940HP Plus possesses the same exceptional chemical resistance, high purity, and protection against ionic contamination as Teflon ™ PFA HP grades with the added benefits of improved flex life (typical MIT flex of 300,000*) and chemical stress-crack resistance. Teflon ™ PFA 940HP Plus meets the increasingly stringent requirements for ultra-reliable and non-contaminating parts, as well as unmatched HCl permeation resistance. The improved flex life and chemical resistance will reduce the cost of ownership of high purity fluid handling systems by reducing downtime caused by mechanical or chemical stresses. Additionally, parts molded with Teflon ™ PFA 940HP Plus have improved clarity and a smooth finish, which can further help prevent buildup of microbial contamination in water handling systems. Table 1 shows the typical property data for Teflon ™ PFA 940HP Plus.
This special purpose resin has a relatively high melt flow rate (typical MFR of 16), which permits higher extrusion speed and easier processing. The enhanced resistance to environmental stress-cracking makes Teflon ® PFA 940HP Plus a preferred resin when extended service is required in hostile environments involving chemical, thermal, and mechanical stress. Additionally, the enhanced purity of Teflon ® PFA 940HP Plus makes it suitable for applications that require improved color, lower extractable fluorides, and freedom from other foreign materials. This product contains no additives and is designed for hostile chemical environments where purity in the parts-per-billion range is needed. Examples are in semiconductor manufacture, fluid handling systems for industry or life sciences, and instrumentation for precise measurements of fluid systems. Teflon ® PFA 940HP Plus combines the processing ease of conventional thermoplastics with the properties similar to those of polytetrafluoroethylene.
With Teflon ® PFA 940HP Plus, components can last longer under dynamic loads and resist damage caused by ozonated fluids and fluorosurfactants. Combined with excellent chemical, permeation, and stress-crack resistance, this durability leads to a reduced cost of ownership. The high purity and fully fluorinated molecule end groups of Teflon ® PFA 940HP Plus can reduce contamination to protect process yields.
Properly processed products made from neat Teflon ® PFA 940HP Plus resin provide the superior properties characteristic of fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes and excellent weather resistance.
In a flame situation, products of Teflon ® PFA 940HP Plus resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke.
Teflon ® PFA 940HP Plus meets the requirements of ASTM D3307, Type IV
供貨地區：北美洲、拉丁美洲、歐洲、亞太地區
材料特性：純度高、低摩擦系數、低吸濕性、低煙度、高 ESCR（抗應力開裂）、良好的電氣性能、良好的柔韌性、流動性高、耐候良好、耐化學品良好、耐熱中等、熱穩定良好、韌性良好、中等透明度
材料用途：襯里、管道系統、管件、液體處理
外觀形式：粒子
加工方法：擠出、樹脂傳遞成型、壓縮模塑、注射成型
物料性能：
| 物理性能 | 額定值 | 單位制 | 測試方法 |
| 密度/比重 | 2.14 | g/cm³ | ASTM D792 |
| 熔流率（熔體流動速率）(372℃/5.0 kg) | 16 | g/10 min | ASTM D3307,ISO 12086 |
| 吸水率(24 hr) | < 0.030 | % | ASTM D570 |
| 硬度 | 額定值 | 單位制 | 測試方法 |
| 肖氏硬度(邵氏 D) | 55 | ASTM D2240,ISO 868 | |
| 機械性能 | 額定值 | 單位制 | 測試方法 |
| 抗張強度 | ASTM D3307,ISO 12086 | ||
| 23℃ | 28.3 | MPa | |
| 200℃ | 11.0 | MPa | |
| 伸長率 | ASTM D3307,ISO 12086 | ||
| 斷裂,23℃ | 310 | % | |
| 斷裂,200℃ | 450 | % | |
| 彎曲模量 | ASTM D790,ISO 178 | ||
| 23℃ | 648 | MPa | |
| 200℃ | 60.0 | MPa | |
| 熱性能 | 額定值 | 單位制 | 測試方法 |
| 熔融溫度 | 290 | ℃ | ASTM D4591 |
| 電氣性能 | 額定值 | 單位制 | 測試方法 |
| 體積電阻率 | 1.0E+18 | ohms·cm | ASTM D257,ISO 1325 |
| 介電強度 | |||
| 0.250 mm,方法A（短時間） | 80 | kV/mm | ASTM D149 |
| 0.250 mm | 80 | kV/mm | IEC 60243-1 |
| 介電常數(1 MHz) | 2.03 | ASTM D150,IEC 60250 | |
| 耗散因數(1 MHz) | < 2.0E-4 | ASTM D150,IEC 60250 | |
| 可燃性 | 額定值 | 單位制 | 測試方法 |
| UL 阻燃等級1 | V-0 | UL 94 | |
| 極限氧指數 | > 95 | % | ASTM D2863,ISO 4589-2 |
| 補充信息 | 額定值 | 單位制 | 測試方法 |
| Critical Shear Rate(372℃) | 56.0 | sec^-1 | |
| MIT Folding Endurance2(200.0 µm) | 3.0E+5 | Cycles | ASTM D2176 |
| 備注 1These results are based on laboratory tests under controlled conditions and do not reflect performance under actual fire conditions,current rating is a typical theoretical value. 2Depending on fabrication conditions |
|||
扎根于過去。放眼于未來。
Teflon™ PFA 是一種四氟乙烯-全氟烷氧基醚共聚物樹脂，可以提供顆粒狀和粉末狀兩種產品形態。這種氟聚合物樹脂可以改進很多行業（包括化學加工、電子、半導體、制藥和生物技術領域）生產的產品。
Teflon™ PFA 樹脂的特性和優勢
Teflon™ PFA 樹脂可以用傳統的熱熔擠出工藝或注塑、壓塑、滾塑成型、傳遞成型和吹塑工藝進行加工。Teflon™ PFA 樹脂的熔體強度和熱穩定性很高，有利于采用較大的模具孔和高溫涂布工藝，從而提高加工速度。
這種樹脂結合了傳統熱塑性樹脂的易加工優勢和 Teflon™ PTFE（聚四氟乙烯）的出色性能，包括：
? 出色的耐化學腐蝕性
? 卓越的電氣性能
? 高達 260℃ (500°F) 的連續工作溫度
? 強大的耐高溫蠕變性能
? 出色的低溫韌性
? 出色的阻燃性
Teflon™ PFA 產品系列
Teflon™ PFA 產品系列包括各種熔體流動速率 (MFR) 的樹脂等級產品，這些產品適用于各種熱塑成型工藝，包括管和薄膜擠出成型、注塑、傳遞成型、壓塑成型和吹塑成型工藝。還可以提供用作涂層、薄膜或彌散材料的 PFA 產品。
Teflon™ PFA 300 系列
? Teflon™ PFA 300 系列樹脂是通用型 PFA 樹脂，適用于模壓或擠塑等熱塑性成型工藝
Teflon™ PFA 400HP 系列
? 完全氟化的 Teflon™ PFA 400HP 系列樹脂專為滿足化學流體處理行業對高純度和最小萃取量的要求而設計。
? Teflon™ PFA HP 氟聚合物樹脂制成的組件具有出色的耐化學腐蝕性和耐環境應力開裂性。這種樹脂幾乎不受任何化學品和溶劑的影響。
Teflon™ PFA 900HP Plus 系列
? Teflon™ PFA 900HP Plus 氟聚合物樹脂具有與 Teflon™ PFA HP 等級產品一樣出色的耐化學腐蝕性、高純度和防離子污染性能，并且具有更長的抗撓曲壽命和更好的耐化學應力開裂性能。此外，這種樹脂還賦予產品更高透明度和更好的表面光潔度，便于觀察在水處理系統中的雜質并防止微生物在表面積聚。
? 這種樹脂能夠提供更穩定可靠，無雜質污染以及耐含氟表面活性劑等特性，滿足于半導體制造加工過程中日益嚴苛的要求。
